Elevate your Life!

Wheelchair Lifts

Southeast Elevator is a distributor of quality wheelchair lifts by Savaria Concord & Ram Manufacturing. The vertical platform lifts are the perfect solution to bypass stairways and access homes or businesses. Designed for wheelchair transport for the mobility impaired, they can be installed indoors or outdoors and are ADA compliant.

Southeast Elevator is also a distributor for other wheelchair lift manufacturers, if the featured product line does not meet your needs.

P.A.L. S

P.A.L. S PLATFORM LIFT

e1 The standard Personal Access Lift (P.A.L.) is an open model built to last with rugged materials and a powerful hydraulic system, designed for either residential or commercial use. The P.A.L.’s size and height can be customized to fit your exact application.

DRAWINGS: Not for Construction Use – information only – contact Southeast Elevator to verfiy the specific needs of your job.

PAL-S-36-TYPE-1L-US

PAL-S-TYPEe-1R-US

PAL-S-36-TYPE-2-US

PAL-S-42-type-1L-US

PAL-S-42-type-1R-US

PAL-S-42-type-2-US

STANDARD EQUIPMENT

  • 409 Stainless Steel Construction in Tower and Mechanical Assembly
  • 48″ (1220mm), Lifting Height From Floor To Floor
  • Rated Speed of 15’ Per Minute (0.075m/sec.)
  • 1:2 Cable Hydraulic Drive System
  • 1 HP 24 Volt DC Motor
  • 24 Volt DC Solid State Electronic Controller
  • Power Requirement: 110 Volts, 1 Phase, 15 Amps
  • Battery Backup Operation in Both Up and Down Directions
  • Automatic Battery Recharging System
  • Slack Cable Safety Device
  • Lower and Upper Limit Switches with Final Limit
  • Manual Lowering Device (Keyed)
  • Negative Pressure Switch
  • Aluminum Framed Cab Panels with Aluminum Inserts and
  • Baked Polyester Powder Coat in Architectural White
  • Anti-Skid Flooring on Platform and Ramp
  • Automatic Emergency Platform Lighting
  • Underpan Safety Sensor
  • Automatic Flip-up 16″ (406mm) Entrance Ramp
  • Constant Pressure Directional Push Buttons on Car Station Control
  • Key Operated On/Off Switch on COP
  • Emergency Stop Switch and Audible Alarm Button on COP

OPTIONAL EQUIPMENT

  • Custom Powder Coating Color
  • 3 Stop Configuration
  • Fasteners for Mounting Tower to Wall – Lag Bolts or Through Bolts
  • Fasteners for Mounting Tower Base to Concrete
  • Bottom Floor Permanent Ramp 8:1 or 12:1 ratio (Enclosed No Pit)
  • Handsfree Telephone
  • Under Platform Safety Prop or Shoring Blocks
  • 43.375″H x 36″W (1073mm x 914mm) Platform Gate with Aluminum or
  • Plexiglass Insert, includes Kwiklock
  • 43.375″H x 36″W (1073mm x 914mm) Landing Gate with Aluminum,
  • Plexiglass (Clear or Bronze) or Tempered Glass Insert, includes Kwiklock
  • 43.375″H x 43.375″W (1073mm x 1073mm) Landing Gate with Aluminum, Plexiglass (Clear or Bronze) or Tempered Glass Insert, includes Kwiklock
  • Custom Landing Gate 36″W (890mm) up to 84″H (2134mm), includes Kwiklock
  • Custom Landing Gate 42.25″W (890mm) up to 84″H (2134mm), includes Kwiklock
  • 36″ W x 91.375″H (890mm x 2292mm) Door with Plexiglass or
  • Tempered Glass Insert, Includes Kwiklock
  • Wing Walls
  • Pro Manual Fire Rated Door with Prolock Interlock
  • Pro Auto Fire Rated Door with Integral Doors and Operators and Prolock Interlock
  • Commander Automatic Doors and Operators
  • Automatic Gate Opener (P.A.L. Door/Gate Only)
  • Hall Call Station Flush Mounted In Frame (not available with ProDoors),
  • Keyed, Keyless, Call/Send, Call Only
  • Hall Call Station Flush Mounted Remote. Keyed, Keyless, Call/Send,
  • Call Only
  • Hall Call Station Surface Mounted. Keyed, Keyless, Call/Send, Call Only
  • Interlocks – Kwiklock, Prolock, GAL

SAFETY FEATURES

  • Slack Rope Safeties that instantly lock the lift onto the rails the moment any lifting cable loses tension preventing any free fall
  • Backup Lighting powered by emergency battery
  • Interlocks provided, which maintain the door in the closed and locked position before elevator can move
  • Improved lock performance utilizing nickel cadmium contact and beak coating
  • Better alignment through the contact block
  • Conformal coating on the lock board to help keep moisture away from the electronics

SPECIFICATIONS

  • Rated Load: 750 lbs. (341 kg.)
  • Normal Speed: 15 fpm (0.08 m/s)
  • Clear Platform Dimensions:
  • 36″ W x 54″ L (914 mm W x 1372 mm L)
  • 36″ W x 48″ L (914 mm W x 1220 mm L)
  • 36″ W x 60″ L (914 mm W x 15246 mm L)
  • 42″ W x 60″ L (1067 mm W x 15246 mm L)
  • Levels Served (Maximum 2)
  • Number of Openings (Maximum 3)
  • Travel Distance (14′ (4.2m) max.)
  • Operation: Constant pressure, anti-creep
  • Power Supply: 110 Volts, 1 Phase, 15 Amps
  • Drive Type: 1:2 Cable hydraulic
  • Emergency Operation: Travel UP and DOWN Direction, 24 volt DC automatic recharging back-up battery system
  • Corrosion Resistance: All materials other than drive train will be 409 stainless steel, aluminum or other corrosion resistant material
  • Paint: Baked Electrostatic Polyester Gloss Powder
  • Backed by the Savaria Concord Limited Warranty wich covers the repair or replacement of any defective parts for a period of 36 months from date of shipment

P.A.L. EN

P.A.L. EN PLATFORM LIFT

e2 This platform lift is enclosed with our own aluminum enclosure walls and various inserts, which provide protection from the elements as well as pleasing aesthetics. Its emergency battery-powered backup system means the lift can be lowered or raised during a power failure. The P.A.L. EN is suitable for residential or commercial use.  DRAWINGS: Not for Construction Use – information only – consult Southeast Elevator to verfiy the specific needs of your job. PAL-ENCLOSURE-36-type-1L-US

PAL-ENCLOSURE-36-type-1R-USPAL-ENCLOSURE-36-type-2-USPAL-ENCLOSURE-42-type-1L-USPAL-ENCLOSURE-42-type-1R-USPAL-ENCLOSURE-42-type-2-US

STANDARD EQUIPMENT

  • 409 Stainless Steel Construction in Tower and Mechanical Assembly
  • 48″ (1220mm), Lifting Height From Floor To Floor
  • Aluminum Framed Enclosure in gloss powder baked enamel paint with
  • aluminum inserts
  • 1:2 Cable Hydraulic Drive System
  • 1 HP 24 Volt DC Motor
  • 24 Volt DC Solid State Electronic Controller
  • Battery Backup Operation in Both Up and Down Directions
  • Automatic Battery Recharging System
  • Lower and Upper Limit Switches with Final Limit
  • Manual Lowering Device (Keyed)
  • Negative Pressure Switch
  • One can of Architectural White Touch Up Paint
  • 36″W x 48″L (914mm x 1220mm) Type 2
  • 43.375″ (1073mm) High Cab Walls
  • Aluminum Framed Cab Panels with Aluminum Inserts and
  • Baked Polyester Powder Coat in Architectural White
  • Anti-Skid Flooring on Platform and Ramp
  • Automatic Emergency Platform Lighting
  • Automatic Flip-up 16″ (406mm) Entrance Ramp
  • Constant Pressure Directional Push Buttons on Car Station Control
  • Key Operated On/Off Switch on COP

OPTIONAL EQUIPMENT

  • 72″ (1829mm), 96″ (2439mm), 120″ (3048mm),
  • 144″ (3658mm), 168″ (4267mm) Lifting Height From Floor To Floor
  • (maximum individual model lifting heights)
  • Custom Powder Coating Color
  • 3 Stop Configuration
  • Fasteners for Mounting Tower to Wall – Lag Bolts or Through Bolts
  • Fasteners for Mounting Tower Base to Concrete
  • 36″W x 54″L (914mm x 1372mm) Type 1, 2, 3 or 4
  • 36″W x 60″L (914mm x 1524mm) Type 1, 2, 3 or 4
  • 42″W x 60″L (1067mm x 1624mm) Type 3 or 4
  • Bottom Floor Permanent Ramp 8:1 or 12:1 ratio (Enclosed No Pit)
  • Handsfree Telephone
  • Under Platform Safety Prop or Shoring Blocks
  • Choice of clear plexi, bronze plexi, clear tempered glass or clear safety
  • laminated glass inserts
  • Sloped or Dome Roof package for outdoor protection
  • Thermostatically controlled ventilation kit
  • Motion Sensor Lighting Package
  • 43.375″H x 36″W (1073mm x 914mm) Platform Gate with Aluminum or
  • Plexiglass Insert, Includes Kwiklock
  • 43.375″H x 36″W (1073mm x 914mm) Landing Gate with Aluminum,
  • Plexiglass (Clear or Bronze) or Tempered Glass Insert, Includes Kwiklock
  • 43.375″H x 43.375″W (1073mm x 1073mm) Landing Gate with Aluminum,
  • Plexiglass (Clear or Bronze) or Tempered Glass Insert, Includes Kwiklock
  • Custom Landing Gate 36″W (890mm) up to 84″H (2134mm),
  • Includes Kwiklock
  • Custom Landing Gate 42.25″W (890mm) up to 84″H (2134mm),
  • Includes Kwiklock
  • 36″ W x 91.375″H (890mm x 2292mm) Door with Plexiglass or
  • Tempered Glass Insert, Includes Kwiklock
  • Wing Walls
  • Pro Manual Fire Rated Door with Prolock Interlock
  • Pro Auto Fire Rated Door with Integral Doors and Operators
  • and Prolock Interlock
  • Commander Automatic Doors and Operators
  • Automatic Gate Opener (P.A.L. Door/Gate Only)
  • Hall Call Station Flush Mounted In Frame (not available with ProDoors),
  • Keyed, Keyless, Call/Send, Call Only
  • Hall Call Station Flush Mounted Remote. Keyed, Keyless, Call/Send,
  • Call Only
  • Hall Call Station Surface Mounted. Keyed, Keyless, Call/Send,
  • Call Only
  • Interlocks – Kwiklock, Prolock, GAL

SAFETY FEATURES

  • Slack Cable Safety Device
  • Underpan Safety Sensor
  • Emergency Stop Switch and Audible Alarm Button on COP
  • SPECIFICATIONS
  • Rated Load: 750 lbs. (341 kg.)
  • Normal Speed: 15 fpm (0.08 m/s)
  • Platform Dimensions: 36″W x 54″ L (914 W x 1372 L mm)
  • Levels Served: Max. 4
  • Number of Openings: Max. 3
  • Travel Distance: 14′ (4.2m) max.
  • Operation: Constant pressure, anti-creep
  • Power Supply: 110 Volts, 1 Phase, 15 Amps
  • Drive type: 1:2 Cable Hydraulic
  • Emergency Operation: Travel Up and DOWN Direction, 24 Volt DC automatic recharging battery System
  • Paint: Baked Electrostatic Polyester Gloss Powder
  • Backed by the Savaria Concord Limited Warranty wich covers the repair or replacement of any defective parts for a period of 36 months from date of shipment

Trus-T-Lift

logoEModi

Independent mobility is your connection to the rest of the world. It allows you to remain active, improving your quality of life. It’s your personal freedom, and that is important to us… that is our job… that is Trus-T-Lift. Safety, comfort and convenience were Trus-T-Lift’s #1 design considerations.

  • Innovative Soft Touch Control Pads for ease of operation.
  • Direct drive Worm-Gear / Screw-Nut Drive for maintenance free operation, incorporating zero load start for cold weather climates (drive system allows motor to get up to full speed before lifting car).
  • Expanded Metal Platform allows full under platform visibility.
  • Keyed Emergency Stop to control use of lift.
  • Trus-T-Lift’s smooth and quiet performance makes this light weight, dependable and versatile unit perfect for any residential or commercial application.